1. Indoor P2.5 full color high brush unit board display more clear and delicate, the resolution can reach 1080P or more; to achieve high refresh rate, high gray and high lamp utilization; no blur, anti-"caterpillar" , Low power consumption, low surge and other functions;
2. Indoor P2.5 thirty-two full-color color paste three-in-one unit board is mainly by the red LED chip, green LED chip and blue LED chip package for a pixel after the composition matrix, and then fixed to the plastic kit to make;
3. This unit board contains the driver chip and input buffer chip, connected to the LED display control system can display video, image and text information;
4. Driving red LED, green LED and blue LED driver chip through OE signal can form 43980 million color transformations;
5. This unit board can be spliced by horizontal and vertical directions, so as to spell different sizes of the display;
6. Features of the cell board:
With ultra-bright LED and high-quality plastic parts, high contrast can achieve a good display
Lightly easy to install, disassemble
Can be a single point, single lamp maintenance, low cost
Using constant current drive LED, light uniform, low power consumption
Pixel pitch is 2.5mm, totaling 64 * 64 pixels, each pixel consists of 1R1G1B
Point spacing: 2.5mm
Module pixels: 64 * 64 points
Module size: 160 * 160mm
Scan mode: 1/32 scan
Pixel density: 160000 points / ㎡
Brightness: ≥ 800CD / ㎡
Module weight: 0.21kg / pcs
Maximum power consumption: 700W / ㎡
Use power consumption: 230 ~ 350W / ㎡
Best viewing distance: ≥2.5M
Lamp Type: SMD2121
Driver IC: Constant current chip with blanking
Refresh frequency: ≥1200HZ
Change frame frequency: 60Hz
Decay rate (3 years): ≤15%
Color temperature: 3000-12000K
Blind rate: <0.0001, factory 0
Viewing angle: Level: 140 °, vertical: 120 °
Grayscale: 13Bit
Input voltage: AC220V ± 10% or AC110V ± 10%
Input frequency: 50 / 60Hz
Signal transmission distance: ultra-five network cable 100m, multi-mode fiber 500m, single-mode fiber 10km
External interface: S-Video, VGA, CVBS, DVI, YPrPb, HDMI, SDI, etc. (optional)
Use temperature: -10 ~ +40 ℃
Use humidity: 10% to 80%
【Application】: for a variety of military aerospace command, traffic security monitoring and dispatch, radio and television media, video conferencing, urban planning exhibitions, such as different indoor places, sports venues, banks, securities, bus stations, docks, shopping malls, Telecommunications, offices, schools, restaurants, businesses, government squares, leisure plaza, large entertainment plaza, bustling business center, advertising information release card, commercial street, train station, stage background.